HOME ABOUT US PRODUCTS NEWS TECHNICAL SUPPORT CONTACT US  

Product Center
 Cold material
 Series diamond products
 Series polishing powder
 Series adhesives used in optical technology and product
 Optical coolant(oil)
 Series polyurethane polishing pellets
 Vacuum coating material
 Series cleaning agent
 Adhesives for product assembly
 Series cleaning material
 Series special coating and protective material
 Series optical damp (lubricating) grease
 Adhesives for product assembly
 Optical Instruments
 Adjustable low light level resolution checker WFJ1
 Preset lens for distortion checking WL535j – 5
 Collimator with big field of view BJ – 041B
 Objective T value checker TCY
 Optical instrumentation

 
      LOCATION: HomeProduct CenterSeries adhesives used in optical technology and productOptical pitch
Name:Optical pitch
Technical parameters:
  It is made of thermoplastic resin and additive. 
It is featured for easy removing and good adherence.
 It is mainly used for bonding of flexible blocking 
of spherical optics.
Details:

Specification

S.N.
Softening
point ℃
锥入度
Anti-shear strength Kg/cm2
Application and features
1
90±2
0 – 0.1
≥10
It is suitable for optics bonding. The pitch can be selected according to room temperature, work piece diameter, pressure and rotation.
2
88±2
0.2 – 0.5
3
85±2
0.6 – 1.0
4
83±2
1.1 – 1.5
5
80±2
1.6 – 2.0
6
Below 80±2
Above 2.0
 
Usage and precautions
1、Heat the pitch till it becomes soft.
2、Stick the hot pitch on the non-processing surface of the optics.
3、Put the processing surface of optics with pitch downwards and stick them to the mould closely according to technological designed arrangement.
4、Put the rubber spherical mould with temperature of 100℃– 120℃ on the mould with optics, then press the mould to let pitch melt and stick on the rubber mould.
5、Put the mould in the hot water with temperature of 30℃ for cooling down and hardening. Take out the mould. The optics are bonded on the mould. They are ready for processing.
6、After processing, put the mould in refrigerator with temperature of -30℃ - -40℃ for 30 minutes, then knock slightly to remove the optics.
7、For optics with big diameter processed at high room temperature with fast rotation and big pressure, it is better to use hard product with high softening point, vice versa.

 

 
Copyright:Yunnan Opto-Electro Auxiliary Material Co.,Ltd
Address:beijing  E-mail:
Phone:0871-68593568  Fax:0871-68590607  Technical Support:NEWFULCRUM 
香港管家婆88300